[Strings]
//Main Form
STR_RALINK_CONFIG_TITLE=TOTOLINK Utility
STR_BtnHintClose=Close
STR_BtnHintHelp=Help
STR_BtnHintLinkInfo=Link Information
STR_BtnHintProfile=Profile
STR_BtnHintSiteSurvey=Site Survey
STR_BtnHintAdvanced=Advanced
STR_BtnHintAbout=About
STR_BtnHintExtendedAP=AP
STR_RALINK_LOST=TOTOLINK Wireless LAN Card Disconnected
STR_RALINK_NOTEXIST=TOTOLINK Wireless LAN Card Not exist
STR_RALINK_WEAK=TOTOLINK Wireless LAN Card Status : Weak
STR_RALINK_NORMAL=TOTOLINK Wireless LAN Card status : Normal
STR_RALINK_GOOD=TOTOLINK Wireless LAN Card Status : Good
STR_RALINK_WEP_ERROR=TOTOLINK Wireless LAN Card Status : WEP Error
STR_INVAILDRADIOOFF=Before using SoftAP, please radio on...
STR_TURNON_AUTOCONFIG=Please turn on AutoConfig service
STR_UI_LOCKED=RaUI is locked by another user
STR_HIDDEN_TEXT=Please enter SSID
STR_RAUI_MESSAGE=RaUI Message
STR_TRAY_LAUNCH=Launch Config Utility 
STR_TRAY_EXIT=Exit
STR_TRAY_SWITCH_AP_MODE=Switch to AP Mode
STR_TRAY_SWITCH_DIAGNOSTIC_MODE=Open Diagnostic Testing Mode
STR_TRAY_SWITCH_ZEROCONFIG=Use Zero Configuration as Configuration Utility
STR_TRAY_SWITCH_RACONFIG=Use RaConfig as Configuration Utility
STR_TRAY_SWITCH_STA_MODE=Switch to Client Mode
STR_TRAY_SWITCH_APCLIENT_MODE=Switch to Client + AP Mode
STR_HOST_NETSTART_FAIL=Start failed!
STR_SWITCH_RADIO_FAIL=Switch radio failed!
//
//MainForm
//
STR_SSID=SSID
STR_TX_RATE=Rate
STR_CHANNEL=Channel
STR_IP=IP Address
STR_MASK=Mask
STR_WIRELESS_MODE=Wireless Mode
STR_SIGNAL_STRENGTH=Signal Strength
STR_DECRYPTION=No Security
STR_NODECRYPTION=Security
//
//ProfileForm
//
STR_BtnHintAdd=Add
STR_BtnHintDelete=Delete
STR_BtnHintEdit=Edit
STR_BtnHintImport=Import
STR_BtnHintExport=Export
STR_BtnHintActivate=Active
STR_BtnHintWPS=Add WPS Profile
STR_BtnHintNext=Next
STR_BtnHintBack=Back
STR_BtnHintCancel=Cancel
STR_PROFILE_LIST=Profile List
STR_PROFILE_NAME=Profile Name
STR_DELCURRENTPROF=The profile to delete is currently in use.
STR_IM_EXPORT_NO_PROFILE=Failed to import! No profile in the file.
STR_IM_EXPORT_PROFILE_MORE_THAN_ONE=Failed to import! More than one profile in the file.
STR_IM_EXPORT_PROFILE_EXIST=Failed to import! This profile name already exists.
STR_IM_EXPORT_SAVE_ANOTHER_FILENAME_REQUIRE=Please try again to save with another file name.
STR_PROF=PROF
STR_PROF_DEFAULT=PROF1
STR_ADHOC=Ad Hoc
STR_ADHOC_NETWORK=Ad Hoc - Connect to other computers
STR_INFRA_NETWORK=Infrastructure - Connect to AP
STR_INVALIDRTSTHRE=RTS Threshold is out of range
STR_INVALIDFRAGTHRE=Frag Threshold is out of range
STR_INPUTPROFILENAME=Please enter profile's name
STR_PROFILENAMELENGTH=Profile name requires 1-32 characters.
STR_ADHOCINPUTSSID=Please enter SSID
STR_DUPLIPROF=Duplicate profile
STR_PROF_IDREQUIRED=Profile ID required in setting Profile.
STR_PROF_IDLIMITED=Please key in the integer number between 0 and 255.
STR_DUPLIPROFID=Duplicate profile ID
STR_PROF_IDOVERFLOW=Profile is limited within 256 items. Please delete any existed profile before adding a profile.
STR_OPENSYSTEM=Open
STR_SHARED=Shared
STR_WPA=WPA
STR_WPAPSK=WPA-PSK
STR_WPA2=WPA2
STR_WPA2PSK=WPA2-PSK
STR_8021X=802.1X
STR_WPANONE=WPA-NONE
STR_CCKM=CCKM
STR_WAPIPSK=WAPI-PSK
STR_WAPICA=WAPI-CA
STR_NONE=None
STR_WEP=WEP
STR_TKIP=TKIP
STR_AES=AES
STR_TKIP_MFP=TKIP(MFP)
STR_AES_MFP=AES(MFP)
STR_SMS4=SMS4
STR_WPAPSKKEY=WPA Preshared Key
STR_HEXA=Hex(10 or 26 hex digits)
STR_ASCII=ASCII(5 or 13 ASCII characters)
STR_PSK_HEXA=Hex(8 ~ 64 hex digits)
STR_PSK_ASCII=ASCII(8 ~ 64 ASCII characters)
STR_WEPKEY=WEP Key
STR_KEY1=Key 1
STR_KEY2=Key 2
STR_KEY3=Key 3
STR_KEY4=Key 4
STR_SHOWPASSWORD=Show Password
STR_KEYFORMAT=Key Format
STR_DEFAULTKEY=Default Tx Key
STR_MSGPSKKEYINVALID=Invalid WPA Pre-Shared key. WPA-PSK used field should use 8-63 ASCII characters or 64 Hex characters.
STR_MSGWPA2PSKKEYINVALID=Invalid WPA2 Pre-Shared key. WPA2-PSK used field should use 8-63 ASCII characters or 64 Hex characters.
STR_MSGWPANONEKEYINVALID=Invalid WPA-NONE key. WPA-NONE used field should use 8-63 ASCII characters or 64 Hex characters.
STR_MSGWAPIPSKKEYINVALID=Invalid WAPI PSK key. WAPI-PSK used field should use 8-64 characters.
STR_MSGHEXWAPIPSKKEYINVALID=WAPI-PSK key requires even Hex characters.
STR_MSGHEXWEPKEYINVALID=Invalid WEP Key length. WEP key requires 10 or 26 Hex characters.
STR_MSGASCIIWEPKEYINVALID=Invalid WEP Key length. WEP key requires 5 or 13 characters.(Note: 1 character is 2 hex)
STR_POWER_SAVE_MODE=Power Save Mode
STR_CAM=CAM
STR_PSM=PSM
STR_RTS_THRESHOLD=Use RTS Threshold
STR_FRAG_THRESHOLD=Use Fragment Threshold
STR_AUTO=Auto
STR_100PERCENT=100%
STR_75PERCENT=75%
STR_50PERCENT=50%
STR_25PERCENT=25%
STR_10PERCENT=10%
STR_LOWEST=Lowest
STR_PREAMBLE=Preamble
STR_LONGPREAMBLE=Long Preamble
STR_SYSCONFIG_NO_CHANN_4_ADHOC=All the channels in the country region are blocked due to DFS enabled. Please change the country region.
STR_PROF_DIAGNOSTIC=Diagnostic Capability
STR_PROFILE_INFORMATION=Profile Information
STR_PROFILE_MAX_ITEM=Profile list is limited within 100 items.
STR_PROFILENAME_INVALIDINT=The integer value following by "PROF" should not exceed 4294967294
STR_PURESPACE_PROFILENAME=Not allow pure spacebar profile name
STR_WPAWPA2PSK=WPA-PSK/WPA2-PSK
STR_TKIP_AES=TKIP+AES
//
//ProfileForm : 802.1XPage
//
STR_8021X_EAP_PEAP=PEAP
STR_8021X_EAP_TLS_SMART_CARD=TLS / Smart Card
STR_8021X_EAP_TTLS=TTLS
STR_8021X_EAP_EAP_FAST=EAP-FAST
STR_8021X_EAP_MD5=MD5-Challenge
STR_8021X_EAP_SIM=EAP-SIM
STR_8021X_EAP_LEAP=LEAP
STR_EAP_METHOD=EAP Method
STR_TUNNEL_AUTHEN=Tunnel Authentication
STR_TUNNEL_AUTHEN_ID=Tunnel ID
STR_TUNNEL_AUTHEN_PASSWORD=Tunnel Password
STR_TUNNEL_AUTHEN_PASSWORD_MODE=Tunnel Password/Mode
STR_DOMAIN_NAME=Domain Name
STR_SESSION_RESUMPTION=Session Resumption
STR_SOFT_TOKEN=Soft Token
STR_STAIC_PASSWORD=Static Password
STR_EAP_MSCHAP_V2=EAP-MSCHAP v2
STR_EAP_TLS_SMART_CARD=EAP-TLS/Smart Card
STR_GENERIC_TOKEN_CARD=Generic Token Card
STR_CHAP=CHAP
STR_MS_CHAP=MS-CHAP
STR_MS_CHAP_V2=MS-CHAP-V2
STR_PAP=PAP
STR_EAP_MD5=EAP-MD5
STR_AUTH_ID=Authentication ID
STR_MACHINE_ID=Machine ID
STR_RADIO_WINDOWS_PASSWORD=Windows Logon
STR_RADIO_PROMPT_PASSWORD=Prompt User
STR_CACHE_USER_INFO=Cache User Info
STR_IDREQUIRED=Identity required in authentication setting!
STR_PWDREQUIRED=Password required in authentication setting!
STR_TUNNELIDREQUIRED=Tunneled identity required in authentication setting!
STR_TUNNELPWDREQUIRED=Tunneled password required in authentication setting!
STR_USE_CLIENT_CERT=Use a certificate on this computer
STR_USE_SMARTCARD=Use my smart card
STR_ISSUED_TO=Issued to
STR_ISSUED_BY=Issued by
STR_EXPIRATION_DATE=Expiration Date
STR_FRIENDLY_NAME=Friendly Name
STR_ENABLE_SERVER_CERT=Use Server Certification
STR_INTERMIDIATE_CERT=Allow intermidiate certificates
STR_SERVER_NAME=Server Name
STR_MATCH_SERVER_NAME=Server name must match exactly
STR_MATCH_DOMAIN_NAME=Domain name must end in specified name
STR_CHECKRULE3=Tunneled identity required for PEAP authentication!
STR_CHECKRULE4=Password required for MD5 authentication!
STR_CHECKRULE5=Please select a client certificate to use!
STR_CHECKRULE6=Server Identity required for TLS/TTLS/PEAP server verification!
STR_CHECKRULE7=Invalid domain name
STR_CHECKRULE8=ID and Password required for LEAP!
STR_CHECKRULE9=Reserved for future release.
STR_PROVISION_MODE=Allow unauthenticated provision mode
STR_USE_PAC=Use protected authentication credential
STR_PROVISIONING_TUNNEL=Provisioning Tunnel 
STR_IMPORT=Import
STR_REMOVE=Remove
STR_PAC_LIST_MAX_ITEM=PAC list is limited within %d items. Please delete any PAC file in PAC list before importing a PAC file.
STR_ERROR_CERT_INVALID_EXPDATE=The expired date of the certificate is invalid! Please re-select a new certificate.
STR_SERVER_NAME_REQUIRED=Server name required in authentication setting!
//
//ProfileFrom : SSO Page
//
STR_ENABLE_SSO=Enable SSO(Single Sign On) Feature
STR_SSO_ENABLE_PERSISTENT_CONNECTION=Enable Persistent Connection
STR_SSO_USE_ID_PASSWORD_IN_WINLOGON=Use ID and Password in Winlogon
STR_SSO_USE_ID_PASSWORD_IN_PROFILE=Use ID and Password in Profile
STR_SSO_PROMPT_ID_PASSWORD_DIALOG=Prompt ID and Password Dialog
STR_PROF_SSO_ALLOW_MACHINE=Allow Machine Authentication
STR_PROF_SSO_LOGON_TYPE=Authentication Type
STR_PROF_SSO_PRE_LOGON=Pre-logon
STR_PROF_SSO_POST_LOGON=Post-logon
STR_PROF_SSO_ENABLE_PRE_LOGON=Use Pre-logon Connection
STR_SSO_RECOMMEND_MSG=You need to restart the computer when using/non-using Pre-logon connection. (recommend)
STR_SSO_NON_EXPORTABLE_PRIVATE_KEY=To support pre-logon, the marking private key as exportable option should be checked when installing user certificate.
//
//ProfileForm : WPS Page
//
STR_PIN=PIN / numeric code
STR_PBC=Push-Button Configuration(PBC)
STR_WPS_ASSOCIATE_IE=WPS Associate IE
STR_WPS_PROBE_IE=WPS Probe IE
STR_WPS_AUTO_SELECT=Auto
STR_PIN_CODE=Pin Code
STR_CONFIG_MODE=Config Mode
STR_WPS_RENEW=Renew 8 digit
STR_WPS_RENEW4=Renew 4 digit
STR_START_PIN=Start PIN
STR_START_PBC=Start PBC
STR_ENROLLEE=Enrollee
STR_REGISTRAR=Registrar
STR_RESCANNING=Rescanning...
STR_INVALID_PIN=Invalid Pin Code
STR_ERROR_PIN=Pin Code error
STR_FINISH=Finish
STR_WPS_PROFILE=WPS Profile
STR_BSSID=BSSID
STR_WPS_AP_CONFIGURED=This connected AP has been configured. Your profile setting can not be applied.
STR_NO_WPS_AP=No AP supported.
STR_WPS_REGISTRAR_OPENNONE=The configuration is not secure.
STR_WPS_CONFIG_AP=Config AP
STR_WPS_CONFIG_STA=Config STA
STR_WPS_UPNP_DISCOVERY_DISABLED_VISTA=Can't use external registrar feature. Please turn off your firewall.
STR_WPS_UPNP_DISCOVERY_DISABLED_XP=Can't use external registrar feature. Please turn off your firewall.
STR_WPS_ERROR_UUID_EMPTY=AP's UUID is empty. Please rescan the AP.
STR_WPS_STATUS_PIN=PIN -
STR_WPS_STATUS_PBC=PBC -
STR_WPS_STATUS_NOT_USED=WPS status is not used
STR_WPS_STATUS_WPS_IDLE=WPS status is idled
STR_WPS_STATUS_EAP_REQ_NACK_RECEIVED=Receive EAP-Req (NACK)
STR_WPS_STATUS_SCAN_AP=Scanning AP
STR_WPS_STATUS_START_ASSOC=Begin associating to WPS AP
STR_WPS_STATUS_LINK_UP=Associated to WPS APs
STR_WPS_STATUS_EAPOL_START_SENT=Sending EAPOL-Start
STR_WPS_STATUS_EAP_RSP_ID_SENT=Sending EAP-Rsp(ID)
STR_WPS_STATUS_EAP_REQ_START_RECEIVED=Receive EAP-Req (WPS_Start)
STR_WPS_STATUS_EAP_M1_SENT=Sending M1
STR_WPS_STATUS_EAP_M1_RECEIVED=Received M1
STR_WPS_STATUS_EAP_M2_RECEIVED=Received M2
STR_WPS_STATUS_EAP_M2_SENT=Sending M2
STR_WPS_STATUS_EAP_M3_SENT=Sending M3
STR_WPS_STATUS_EAP_M3_RECEIVED=Received M3
STR_WPS_STATUS_EAP_M4_SENT=Sending M4
STR_WPS_STATUS_EAP_M4_RECEIVED=Received M4
STR_WPS_STATUS_EAP_M5_SENT=Sending M5
STR_WPS_STATUS_EAP_M5_RECEIVED=Received M5
STR_WPS_STATUS_EAP_M6_SENT=Sending M6
STR_WPS_STATUS_EAP_M6_RECEIVED=Received M6
STR_WPS_STATUS_EAP_M7_SENT=Sending M7
STR_WPS_STATUS_EAP_M7_RECEIVED=Received M7
STR_WPS_STATUS_EAP_M8_SENT=Sending M8
STR_WPS_STATUS_EAP_M8_RECEIVED=Received M8
STR_WPS_STATUS_EAP_M2D_RECEIVED=Received M2D
STR_WPS_STATUS_EAP_M2D_SENT=Sending M2D
STR_WPS_STATUS_EAP_RSP_ACK_SENT=Sending EAP-Rsp (ACK)
STR_WPS_STATUS_EAP_RSP_DONE_SENT=Sending EAP-Rsp (Done)
STR_WPS_STATUS_EAP_REQ_DONE_RECEIVED=Received EAP-Rsp (Done)
STR_WPS_STATUS_GET_PROFILE=Get WPS profile successfully.
STR_WPS_STATUS_INVALID_SSID=Invalid SSID in PIN mode
STR_WPS_STATUS_EAP_REQ_WRONG_SMI=Receive EAP-Req with wrong WPS SMI Vendor Id
STR_WPS_STATUS_EAP_REQ_WRONG_VENDOR_TYPE=Receive EAP-Req with wrong WPS Vendor Type
STR_WPS_STATUS_EAP_FAILED=WPS Eap process failed
STR_WPS_STATUS_PBC_TOO_MANY_AP=Too many PBC AP available
STR_WPS_STATUS_PBC_NO_AP=No PBC AP available
STR_WPS_STATUS_EAP_FAIL_RECEIVED=Received EAP-FAIL
STR_WPS_STATUS_EAP_NONCE_MISMATCH=Receive EAP with wrong NONCE
STR_WPS_STATUS_EAP_INVALID_DATA=Receive EAP without integrity (Hmac mismatch)
STR_WPS_STATUS_PASSWORD_MISMATCH=Error PIN Code (R-Hash mismatch)
STR_WPS_STATUS_EAP_CONFIGURED=WPS Eap process successfully
STR_WPS_STATUS_EAP_M3_NOT_RECEIVED=Not Received M3
STR_WPS_STATUS_EAP_M5_NOT_RECEIVED=Not Received M5
STR_WPS_STATUS_EAP_M7_NOT_RECEIVED=Not Received M7
STR_WPS_STATUS_UPNP_DEVICE_NOT_FOUND=Not found matched UPnP device
STR_WPS_STATUS_UPNP_DEVICE_FOUND=Found matched UPnP device
STR_WPS_STATUS_UPNP_M1_RECEIVED=UPnP Received M1
STR_WPS_STATUS_UPNP_M2_SENT_OK=UPnP sent M2 successfully
STR_WPS_STATUS_UPNP_M3_RECEIVED=UPnP Received M3
STR_WPS_STATUS_UPNP_M4_SENT_OK=UPnP sent M4 successfully
STR_WPS_STATUS_UPNP_M5_RECEIVED=UPnP Received M5
STR_WPS_STATUS_UPNP_M6_SENT_OK=UPnP sent M6 successfully
STR_WPS_STATUS_UPNP_M7_RECEIVED=UPnP Received M7
STR_WPS_STATUS_UPNP_M8_SENT_OK=External registrar configure enrollee successfully
STR_WPS_STATUS_EXTREG_CONFIG_STA_FAIL=External registrar configure enrollee failed
STR_WPS_STATUS_UPNP_NACK_SENT_OK=UPnP sent WSC_NACK successfully
STR_WPS_STATUS_EXTREG_SCAN_ONE_ENROLLEE=One enrollee is scanned
STR_WPS_STATUS_EXTREG_SCAN_ENROLLEE=Scanning enrollee...
STR_WPS_STATUS_EXTREG_PBC_TOO_MANY_ENROLLEE=Too many enrollee are scanned
STR_WPS_STATUS_EXTREG_PBC_NO_ENROLLEE=No enrollee are scanned
STR_WPS2_SECURITY_NOT_ACCEPT=Not accept profile whose security is WEP or WPA or TKIP for WPS verion2
STR_WPS_STATUS_GET_PROFILE_DISCARD=Get WPS profile successfully but discard.
STR_WPS_VERSION=WPS Version
STR_PROFILE_DETAIL=Profile Detail
STR_WPS_STATUS_EXTREG_CONFIGSTA_OK=External registrar configure enrollee successfully
STR_WPS_STATUS_UPNP_DEVICE_REMOVED=Current UPnP device removed
STR_WPS_MSGBOX_CONFIGAP_OPEN_CONNECT=The network is configured with OPEN security. Do you want to connect?
STR_WPS_MSGBOX_CONFIGAP_RECONFIGURE=This connected AP has been configured. You can select "YES" to try to reconfigure.
STR_WPS_MSGBOX_CONFIGAP_PROF_OPEN=Your profile uses OPEN security to configure, and do you still want to configure?
STR_WPS_MSGBOX_CONFIGAP_UNCONFIGURED_PROF_OPEN=This AP is unconfigured. Your profile uses OPEN security to configure, and do you still want to configure?
//
//ProfileForm : UserCertPage
//
STR_USER_CERT=Use User Certificate
STR_BROWSE=Browse
STR_ERROR_LOAD_CER=Failed to load! Please re-select a new certificate.
STR_ERROR_SETUP_CER=Failed to setup! Please re-select a new certificate.
STR_NO_USER_CERT=Must select a user certificate with WAPI-CERT.
//
//ProfileForm : ASCertPage
//
STR_AS_CERT=Use As Certificate
STR_NO_AS_CERT=Must select a AS certificate with WAPI-CERT.
//
//ProfileForm : WAPICertPage
//
STR_SELECTCERTMODE=Select Mode
STR_WAPI_CERT=WAPI Certificate
STR_CERTMANAGENT=WAPI Management
STR_CERTIFICATE_INFO=Certificate Information
STR_SERIAL_NUMBER=Serial Number
STR_ISSUER=Issuer
STR_SUBJECT=Subject
STR_VALID_PERIOD=Valid Period
STR_MANUAL=Manual
STR_VERSION_INFO=Version Information
STR_SERIAL_NUM=Serial Number
STR_SELECT_USER_CERT=Please select user certificate.
STR_SELECT_AS_CERT=Please select Issuer certificate.
STR_MSG_INSTALL_CERT_STA_ERR=Invalid User certificate
STR_MSG_INSTALL_CERT_AS_ERR=Invalid Issuer certificate
STR_MSG_INSTALL_CERT_AS_ISSUER_SUBJECT=Issuer and subject are not matched in Issuer certificate.
STR_MSG_INSTALL_CERT_STA_AS_NOT_MATCH=User certificate and Issuer certificate are not matched.
STR_MSG_INSTALL_CERT_EXIST=This setting already exists.
STR_MSG_INSTALL_CERT_MAX_SIZE=Reach max setting size
STR_MSG_PROFILE_SAVE_NO_CERT=No certificate installed. The profile isn't saved.
STR_MSG_INSTALL_CERT_AS_ISSUER_SUBJECT2=Issuer and subject are matched in Issuer certificate.
STR_TITLE_PSK=PSK
STR_PSK_KEY_TYPE=Key Type
STR_PSK_KEY=Key
STR_MSG_KEY_LENGTH_LESS_64=The key length should be less than 64.
STR_MSG_KEY_LENGTH_MULTI_2=The key should be a multiple of 2.
STR_MSG_KEY_LENGTH_LARGER_8=The key length should be larger than 8.
STR_MSG_KEY_LENGTH_NULL=The key value can't be NULL.
STR_TITLE_80211R=802.11R
STR_MSG_KEY_LENGTH_BETWEEN_8_64=The key length should be between 8 and 64.
//
//SitesurveyForm
//
STR_BtnHintRescan=Rescan
STR_BtnHintConnect=Connect
STR_BtnHintAddToProfile=Add to Profile
STR_NOSELECTEDITEM=No selected item
STR_SORTED_BY_SSID=Sorted by SSID
STR_SORTED_BY_CHANNEL=Sorted by Channel
STR_SORTED_BY_SIGNAL=Sorted by Signal Strength
STR_AP_INFORMATION=AP Information
//
//AboutForm
//
STR_BtnHintVersion=Version
STR_BtnHintLicense=License
STR_EEPROM=EEPROM
STR_DRIVER=Driver
STR_FIRMWARE=Firmware
STR_MAC=MAC Address
STR_DATE=Date
STR_UTILITY=Utility
STR_DLL=SDK
STR_COPYRIGHT=(c) Copyright 2010, TOTOLINK Technology, Inc.
STR_COPYRIGHT2=All rights reserved.
STR_VERSION=Version
//
//LinkInfoForm
//
STR_BtnHintWireless=Link Status
STR_BtnHintThroughput=Throughput
STR_BtnHintStatistic=Statistics
//
//LinkInfoWirelessPage
//
STR_LINK_STATUS=Status
STR_AP_STATUS=AP Status
STR_EXTRA_INFO=Extra Info
STR_AUTHENTICATION=Authentication
STR_ENCRYPTION=Encryption
STR_NETWORK_TYPE=Network Type
STR_GENERAL_LINK_UP=Link is Up
STR_GENERAL_LINK_DOWN=Link is Down
STR_HW_RADIO_OFF=Hardware radio off
STR_SW_RADIO_OFF=Software radio off
STR_AUTH_FAIL=Open authentication fail
STR_AUTH_FAIL_KEYS=Shared authentication fail
STR_ASSOC_FAIL=Association failed
STR_EAP_MIC_FAILURE=Deauthencation because MIC failure
STR_EAP_4WAY_TIMEOUT=Deauthencation on 4-way handshake timeout
STR_EAP_GROUP_KEY_TIMEOUT=Deauthencation on group key handshake timeout
STR_EAP_SUCCESS=EAP succeed
STR_WEPERROR=ICV Error
STR_TX_POWER=Tx Power
STR_RADIOOFF=Turn off RF
STR_RADIOON=Turn on RF
STR_DRIVER_NOTOK=NIC or driver not ready
STR_PROCESSING_CONNECTION=Connecting...
STR_DISCONNECTED=Disconnected
STR_AUTOCONFIG_DISABLE=AutoConfig service is disable.
STR_IBSS=IBSS
STR_INFRA=Infrastructure
STR_CENTRAL_CHANNEL=Central Channel
STR_HT=HT
STR_NA=N.A.
STR_SNR0=SNR0
STR_SNR1=SNR1
//
//LinkInfoThroughputPage
//
STR_TRANSMIT=Transmit
STR_RECEIVE=Receive
STR_LINK_SPEED=Link Speed
STR_TX_THROUGHPUT=Throughput
STR_RX_THROUGHPUT=Throughput
STR_LINK_STRENGTH=Link Quality
STR_STRENGTH1=Signal Strength 1
STR_STRENGTH2=Signal Strength 2
STR_STRENGTH3=Signal Strength 3
//
//LinkInfoStatisticsPage
//
STR_TX_TRANSMIT=Transmit
STR_TXOK=Transmitted Successfully
STR_TXOKRETRY=Retransmitted Successfully
STR_TXOKALLRETRY=Fail To Receive ACK After All Retries
STR_RX_RECEIVE=Receive
STR_RXOK=Received Successfully
STR_RXCRC=Received With CRC Error
STR_RXDROP=Dropped Due To Out-of-Resource
STR_RXDUPLI=Duplicate Frames Received
STR_RESETCOUNTER=Reset Counter
//
//Advanced Form
//
STR_BtnHintWMM=WMM
STR_BtnHintCCX=CCX
STR_BtnHntCertCenter=Certificate Management
STR_24GHZ=2.4GHz
STR_5GHZ=5GHz
STR_24GHZ5GHZ=2.4GHz + 5GHz
STR_ENABLE_TX_BURST=Enable TX Burst
STR_ENABLE_TCP_WINDOW_SIZE=Enable TCP Window Size
STR_FAST_ROAMING=Fast Roaming at
STR_DBM=dBm
STR_SHOW_AUTH_STATUS=Show Authetication Status
STR_BGPROTECTION=B/G Protection
STR_ENABLE11NMODE=Enable 11n Mode
STR_ON=ON
STR_OFF=OFF
STR_1MBPS=1 Mbps
STR_2MBPS=2 Mbps
STR_55MBPS=5.5 Mbps
STR_11MBPS=11 Mbps
STR_6MBPS=6 Mbps
STR_9MBPS=9 Mbps
STR_12MBPS=12 Mbps
STR_18MBPS=18 Mbps
STR_24MBPS=24 Mbps
STR_36MBPS=36 Mbps
STR_48MBPS=48 Mbps
STR_54MBPS=54 Mbps
STR_INVALID_DBM=Please key in the integer number between -40 and -90.
STR_HT_PHYSICAL_MODE=HT Physical Mode
STR_HT_MODE=HT Mode
STR_BW=BW
STR_GI=GI
STR_STBC=STBC
STR_MCS=MCS
STR_MM=MM
STR_GF=GF
STR_BW20=BW20
STR_LONG=Long
STR_NOT_AVAIL_GI_STBC_GF=GF, Short GI, and STBC used don't setup together
STR_COUNTRY_REGION=Select Your Country Region Code
//
//Advaced Form : WMM Page
//
STR_WMM_SETTINGS_STATUS=WMM Settings Status
STR_WMM=WMM
STR_POWER_SAVE=Power Save
STR_DLS=Direct Link
STR_WMM_ENABLE=WMM Enable
STR_POWER_SAVE_ENABLE=Power Save Enable
STR_DLS_ENABLE=Direct Link Enable
STR_AC_BK=AC_BK
STR_AC_BE=AC_BE
STR_AC_VI=AC_VI
STR_AC_VO=AC_VO
STR_MAC_ADDRESS=MAC Address
STR_TIMEOUT=Timeout Value
STR_SECOND=Seconds
STR_SETUP=Setup
STR_TEAR_DOWN=Tear Down
STR_ENABLED=Enable
STR_DISABLED=Diable
STR_INVALIDMACADDR=Invalid MAC Address
STR_NOTACCEPTB=Invalid MAC Address
STR_INVALIDTIMEOUT=Please enter a integer between 21 to 65535.
//
//Advanced Form : CCX Page
//
STR_ENABLE_CCX=Enable CCX (Cisco Compatible eXtensions)
STR_RADIO_MEASURE=Enable Radio Measurements
STR_NON_SERVING_CHANNEL_MEASURE=Non-Serving Channel Measurements Limit
STR_RF_ROAM_ENABLE=Roaming with RF Parameters
STR_VOICE_RATE=Voice Drastic Roaming
STR_BUSY_SENSE=Busy Sense
STR_MEASURE_TIME_UNIT=ms(1-1023)
STR_ENABLE_CAC=CAC
STR_CAC_APPLY=SET
STR_PROFILE_INFOR=Information
STR_DIAGNOSTIC=Diagnostic
STR_DIAGNOSTIC_CONNECT=Diagnostic Connection
STR_SELECT_PROFILE=Select Profile
STR_DIAGNOSTIC_CAPABILITY=Diagnostic Capability
STR_APPLY=Apply
STR_ADDTS=ADDTS(Directly send TS)
STR_DELTS=DELTS
STR_RESET=RESET
STR_INVALID_MEASURE_TIME=Please key in the integer number between 1 and 1023.
STR_PLZ_SELECT_PROFILE=Please select a profile
STR_PLZ_DIAGNOSTIC_PROFILE=Please activate the profile before diagnosing
STR_PLZ_ENABLE_DIAGNOSTIC=Please enable diagnostic function
STR_CANCEL=Cancel
STR_NO=No
STR_YES=Yes
STR_OK=OK
//
//Advanced Form : Cert Management Page
//
STR_INSTALL_CERT=Install Certificate
STR_CA_STA_CERT=User certificate
STR_CA_AS_CERT=Issuer certificate
STR_INSTALL=Install
STR_UP=UpMove
STR_DOWN=DownMove
STR_INSTALL_AS=Install AS
STR_DELETE=Delete
STR_CERT_DETAIL=Certificate Detail
STR_TYPE=Type
STR_VALID_FROM=Valid From
STR_VALID_TO=Valid To
//
//Advanced Form : WiFi Direce Page
//
STR_BtnHintWiFiDirect=Wi-Fi Direct
STR_WIFIDIRECT_DISABLE_TEXT=Wi-Fi Direct is disabled...%sPlease double-click the icon to enable Wi-Fi Direct
STR_WIFIDIRECT_OFF=Double-click to disable Wi-Fi Direct%sRight-click to adjust Wi-Fi settings.
STR_WIFIDIRECT_OFF_MSG=Are you sure you want to disable Wi-Fi Direct ?
STR_WIFIDIRECT_ON=Double-click to enable Wi-Fi Direct
STR_WIFIDIRECT_DEVICEINFO=Device Information : 
STR_WIFIDIRECT_MYDEVICEINFO=My Device Information : 
STR_WIFIDIRECT_SSID=SSID
STR_WIFIDIRECT_KEY=
STR_WIFIDIRECT_RULE=Rule
STR_WIFIDIRECT_DEVICENUM=%d nearby deivce(s) found
STR_WIFIDIRECT_MEMBERNUM=%d client device(s)
STR_WIFIDIRECT_CLIENT=Client
STR_WIFIDIRECT_OWNER=Owner
STR_WIFIDIRECT_SETTINGS=Wi-Fi Direct Setting
STR_ENTER_DEVICE_NAME=Please provide a nickname of your Wi-Fi Device
STR_DEVICE_NAME_LENGTH=Device name requires 1-32 characters.
STR_COM_NAME=Use My Computer name :
STR_WIFIDIRECT_SCAN=Scan
STR_WIFIDIRECT_AUTOGO_START=Start autonomous GO
STR_WIFIDIRECT_AUTOGO=Enable autonomous GO
STR_WIFIDIRECT_DISABLE_AUTOGO=Disable autonomous GO
STR_WIFIDIRECT_DISCONNECT=Disconnect
STR_WIFIDIRECT_OPEN_PROFILE=Manage Profile 
STR_WIFIDIRECT_PROFILE=Wi-Fi Direct Profile
STR_WIFIDIRECT_PROVISION=Provision
STR_WIFIDIRECT_CONNECT=Connect
STR_WPS_TYPE=WPS Type
STR_WPS_BTN_HINT=WPS
STR_WPS_TYPE_PIN=Default PIN
STR_WPS_TYPE_USERPIN=Enter PIN (ask Display PIN)
STR_WPS_TYPE_REGPIN=Display PIN
STR_WPS_TYPE_PBC=PBC
STR_INTENT_INDEX=Intent index
STR_MSG_INTENTINDEXINVALID=Invalid Intent idex, Intent idex = 0~15
STR_LINTENING_CHANNEL=Listening channel
STR_OPERATING_CHANNEL=Preferred channel
STR_PROF_SAVE=Save to profile
STR_WIFIDIRECT_PROF_APPLY=Apply
STR_WIFIDIRECT_CONNECT_WAIT=Connecting...Please Wait..
STR_WIFIDIRECT_SECURITY_TYPE=Security Type
STR_TRAY_SWITCH_WIFIDIRECT_MODE=Switch to Client + Wi-Fi Direct Mode
STR_TRAY_WIFIDIRECT_MSG_TITLE=Wi-Fi Direct message
STR_TRAY_WIFIDIRECT_CONNECT_REQ=Get a connect request message from%sn%s
STR_BTN_DETAIL=Detail
STR_MSG_NOWPSTYPE=Don't support any WPS Capability 
STR_MSG_ERRCODE_BOTHINTENT15=Both intent 15
STR_MSG_ERRCODE_CHANNELDISMATCH=Channel dismatch: peer channel is %s
STR_MSG_ERRCODE_WPSNACK=PIN code error
STR_MSG_ERRCODE_CANTFIND=Can't scan the P2P device
STR_MSG_ERRCODE_NOCONFIGMETHOD=WPS method mismatch:Please use %s
STR_MSG_ERRCODE_ERRCODE_REACHLIMIT=Group nummber reach limitation
STR_MSG_ERRCODE_ERRCODE_REJECTBYUSER=Reject by user
STR_MSG_ERRCODE_CHANNELCONFLICT=P2P group session is terminated due to channel conflict
STR_MSG_WARNING_CONFIG_GO=Invite %s. Please set wps type from GO
//
//Media Sharing Form
//
STR_WIFIDIRECT_MEDIA_SHARING=Media Sharing
STR_WIFIDIRECT_SHARING_FOLDER=Sharing Folder
STR_WIFIDIRECT_SELECT_SHARING_FOLDER=Please select sharing folder
STR_MEDIASHARING_START=Start Sharing
STR_MEDIASHARING_STOP=Stop Sharing
STR_SERVICE_STATUS=Service status
STR_SERVICE_STOP=Stopped
STR_SERVICE_START=Started
STR_WIFIDIRECT_SERVER_FRIENDLY_NAME_REQUIRED=Please enter server friendly name

//
//Extended AP Form
//
STR_BtnHintExtAPConfig=AP Configuration
STR_BtnHintExtAPMacTable=MAC Table
//
//Extended AP Form : ExtendedAPConfig Page
//	
STR_CLIENT_NUM=Max Number of Peers
STR_KEY_MATERIAL=WPA2 Pre-Shared Key
STR_EXTAP_INVALID_MAXCLIENT=Please enter an integer between 1 and 32
STR_MSG_SWITCH_APCLIENT_MODE_FAIL=Switch to Client + AP mode failed.
STR_MSG_INVALID_MAXCLIENT=Please enter an integer between 1 ~ 32.
STR_EXTAP_DEFAULTVALUE=Please enter SSID and Pre-Shared key.
//    
//Extended AP Form : ExtendedAPMacTable Page
//
//
//PeapIdPwd Form
//
STR_PEAP_ONE_TIME=Peap Setting - One Time Password
STR_EAP_FAST_ONE_TIME=EapFast Setting - One Time Password
STR_PEAP_DESCRIPTION=Description : Peap Setting - One Time Password
STR_EAP_FAST_DESCRIPTION=Description : EapFast Setting - One Time Password
STR_TUNNEL_IDENTITY=Tunnel Identity
STR_TUNNEL_PASSWORD=Tunnel Password
STR_ENTER_NEW_PASSWORD=Enter your new password
STR_ENTER_NEW_PASSWORD_DESCRIPTION=Description : Enter your new password
STR_IDENTITY=Identity
STR_PASSWORD=Password
STR_INPUT_IDENTITY=Must input Identity
STR_INPUT_PASSWORD=Must input Password
//
//InvalidIdPwd Form
//
STR_CARD_NAME=Card Name
STR_MESSAGE=Message
STR_INVALID_IDPW=Invalid identity or password
STR_LEAP_TIMEOUT=Unable to LEAP authenticate the wireless user in the specified amount of time. Network infrastructure might be down. Please press OK to reconnect.
STR_EAP_FAST_TIMEOUT=Unable to EAP-FAST authenticate the wireless user in the specified amount of time. Network infrastructure might be down. Please press OK to reconnect.
STR_TLS_TIMEOUT=Unable to TLS authenticate the wireless user in the specified amount of time. Network infrastructure might be down. Please press OK to reconnect.
STR_TTLS_TIMEOUT=Unable to TTLS authenticate the wireless user in the specified amount of time. Network infrastructure might be down. Please press OK to reconnect.
STR_MD5_TIMEOUT=Unable to MD5 authenticate the wireless user in the specified amount of time. Network infrastructure might be down. Please press OK to reconnect.
STR_PEAP_TIMEOUT=Unable to PEAP authenticate the wireless user in the specified amount of time. Network infrastructure might be down. Please press OK to reconnect.
//
//Select Card Form
//
STR_SELECT_CARD=Select Wireless LAN Card 
STR_DEVICE_DESCRIPTION=Device Description
STR_HARDWARE_ID=Hardware ID
STR_LOCATION_INFO=Location Information
STR_MANUFACTORY=Manufactory